2024 Bush Hog® Flex-Wing Rotary Cutter 2215

2024 Bush Hog® Flex-Wing Rotary Cutter 2215

Swipe to View More

  • Year 2024
  • Make Bush Hog®
  • Model Flex-Wing Rotary Cutter
2024 Bush Hog® Flex-Wing Rotary Cutter 2215

2024 Bush Hog® Flex-Wing Rotary Cutter 2215

2024 Bush Hog® Flex-Wing Rotary Cutter 2215

The Bush Hog® model 2215 Flex-Wing rotary cutter is designed to cut grass, weeds, and brush up to 3 1/2” in diameter. It is recommended for use in pasture maintenance, crop shredding, and roadside maintenance. With maintenance friendly features such as EZ clean decks, EZ lube drivelines and Bush Hog® tough durability, the 2215 is another Flex-Wing example of Bush Hog® Performance You Can Count On.

Features may include:

  • Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life.
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
CONSTRUCTION
  • Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
  • Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
  • All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
  • Greaseable Axle Pivot Points with spring steel bushings
  • Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
  • Powder Coat Paint
SAFETY
  • Improved design of wing sidebands means less damage caused by sideband-to-ground contact.

PTO

PTO Power, Rated Engine Speed Minimum Tractor Pto Hp:60

Drivetrain

Driveline Input: Category 6| Wing: Category 4
Gearbox TRANSFER: 250 | CUTTING: 210 hp

Suspension

Suspension Axle: Springs @ Each Axle

Operational

Operating Speed Blade Tip Speed: 16,286 FPM

Hydraulics

Hydraulic Type Center & Wing: 3 Hoses Standard

Chassis

Hitch/Type Perma-Level
Deck Thickness Center: 10Ga | Wing: 10Ga

Dimensions

Cutting Width 15'
Height Cutting: 2" – 14"
Dimensions Blades: 1/2" X 4" | Cutting Capacity: 3 1/2" | Wing Cutting Angles: 22° Down And 45° Up | Sidebands: 1/4" X 13 1/2"
Transport Width 8' 2"
Transport Height 15' 3"

Weights

Weight Approximate: 4,700 lb | Approximate Tongue: 1,800 Lb

Features

Adjustability Wing Level: Turnbuckles
Features Blade Holder: 7Ga Round Pan

Warranty

Warranty 10-Year Gearbox Limited| 1-Year Machine Limited

Product Photography